Our partner, Vietnam glocoating Engineering (VgCE), has recently completed the refurbishment of a number of absorber circulation pumps and impellers for the Vedan Vietnam Enterprise Corp., a large manufacturer of organic fertilizer and feed additives. After conducting an on-site assessment survey...

Alhuda Corrosion Treatment in Qatar was asked by Nakilat Svitzer Wijsmuller (NSW) to recommend a long-term corrosion protection system for two new 1.5m long propeller shafts. The shafts would be working in a harsh marine environment, so were made from super duplex stainless steel, but NSW wanted...

Corroserve was invited by a UK power station to inspect a loading bay floor that was experiencing attack due to its aggressive chemical environment. The concrete surface had been badly damaged and required repair and protection from further attack – a level of protection not achievable with...

Leading supplier of cement, ready mix concrete, mortars, screeds and aggregates, Cemex approached Corrocoat uSA to design a more durable nozzle than the urethane version presently used to pump silty water. The current nozzles show wear after just two weeks and ultimately fail in as little as four...

Corrocoat Japan was asked to service a raw water pump that they last serviced in 2011. At that time the vertical wet-pit volute pump had been in operation since 1993 without any servicing and as a result all the internal components were found to have deteriorated. A full refurbishment was carried...

Corrocoat Caspian in Kazakhstan was asked to line the internal surfaces of three fuel tanks at the Pavlodar Oil Refinery. The tanks are an integral part of the refinery and required a coating system approved for use with petroleum products in immersed conditions. In order to win the tender...

Kirloskar Corrocoat Private Ltd (KCPL) has been operating in India since 1993 using Corrocoat coating systems to protect all manner of infrastructure and assets in many industry sectors. KCPL, was asked to protect 1.3m and 1.5m diameter cold water inlet and outlet pipes for the Tangedco Ennore...

When Corrocoat SA was approached by Eskom Medupi Power Station – one of the world’s largest coal fired power plants - to provide corrosion protection for six stainless steel flue cans, they realised that this would be a major challenge. The cans were located at the top of Eskom’s chimney stacks,...

AL SABAIEA TO THE RESCUE Al Sabaiea engineers were called to an emergency at the Kharafi National Power Station. A fibreglass pipe had suffered a major leak where the collar meets the flange section and required immediate repair in order to keep the power station running. After stemming the flow,...

Corroserve was asked by uBH International, a world-leading manufacturer of tanks and containers, to recommend a coating system for the internal corrosion protection of 10 newly fabricated stainless steel tanks and 20 pipe spool sections. The equipment would be operating in aggressive conditions -...