inner-page-header
Corrosion Solutions for Aggressive Environments

PLASMET

High performance, abrasion-resistant protective coatings and surface-tolerant primers. The often-specified Plasmet range of protective coatings from Corrocoat brings together a selection of durable materials formulated to provide high performance solutions developed to meet the demands of differing operational environments.

The range includes specially engineered abrasion-resistant options, available in differing grades, designed to meet abrasive operational challenges found in industry worldwide.

Corrothane AP1

A two-pack, solvent borne, isocyanate-free polyurethane/acrylic top coat.

52ff0e80b07d28b590bbc4b30befde52

Epoxy Injection Grout & Resin

A two-pack cold cured epoxy injection material with high tensile strength.

52ff0e80b07d28b590bbc4b30befde52

Galvcoat

A single pack coating based on a synthetic polymer and containing barrier pigments.

52ff0e80b07d28b590bbc4b30befde52

Genmend

A polyamine cured general purpose two-pack epoxy putty.

52ff0e80b07d28b590bbc4b30befde52

Plasguard

A single pack, high build, water based, vinyl-acrylic coating containing flake pigmentation.

52ff0e80b07d28b590bbc4b30befde52

Plasmet AR3

A two-pack, solvent-free, polyamine cured epoxy, resistant to strong concentrations of sulphuric and other acids.

52ff0e80b07d28b590bbc4b30befde52

Plasmet AR3 Screed

A hardwearing, slip-free, three-pack, solvent-free polyamine cured epoxy screed, resistant to strong concentrations of sulphuric and other acids.

52ff0e80b07d28b590bbc4b30befde52

Plasmet ECP

A high solids, low viscosity, two or three-pack epoxy primer with excellent adhesion to damp surfaces.

52ff0e80b07d28b590bbc4b30befde52

Plasmet HTE

A viscous, solvent-free, two or three-pack, amine cure epoxy containing both stainless steel flakes, glass flakes and silicon carbide.

52ff0e80b07d28b590bbc4b30befde52

Plasmet Masonry Guard

A liquid dispersion in mineral spirits.

52ff0e80b07d28b590bbc4b30befde52

Plasmet R

A solventless chemically resistant two-pack epoxy repair and rebuilding compound.

52ff0e80b07d28b590bbc4b30befde52

Plasmet SB1

A one-pack, solvent based, chlorinated rubber coating containing lamellar flake pigmentation.

52ff0e80b07d28b590bbc4b30befde52

Plasmet T

A solvent free, two-pack smooth surfacing material with good chemical resistance.

52ff0e80b07d28b590bbc4b30befde52

Plasmet WB1

A one-pack, water based, modified vinyl acrylic coating containing lamellar flake pigmentation.

52ff0e80b07d28b590bbc4b30befde52

Plasmet WR

A solvent-free, three-pack polyamine cured epoxy containing high levels of abrasion resistant filler.

52ff0e80b07d28b590bbc4b30befde52

Plasmet ZE

A polyamine cured, high solids, two-pack glass-filled epoxy with good gloss and chemical resistance.

52ff0e80b07d28b590bbc4b30befde52

Plasmet ZF

A surface tolerant two-pack epoxy coating compound incorporating a rust inhibitor and passivator, with MIO and glass flake for increased protection.

52ff0e80b07d28b590bbc4b30befde52

Plasmet ZX

A brush applied, polyamine cured, two-pack epoxy top coat with good gloss and chemical resistance.

52ff0e80b07d28b590bbc4b30befde52